diff --git a/.github/scripts/cutlery_from_wheel.py b/.github/scripts/cutlery_from_wheel.py index 2be6e767..fdc43b3b 100644 --- a/.github/scripts/cutlery_from_wheel.py +++ b/.github/scripts/cutlery_from_wheel.py @@ -51,7 +51,11 @@ base.PACKS = (PLANT,) #: The files that are the pack. The rest of `labs/cutlery` is the lab's #: tooling and a pack carries no code (decision 0022). -PACK_FILES = ("plant.toml", "line.json", "floor.json", "tag_map.json") +#: line_layout.json and models/ joined on 2026-11-14: where each machine stands +#: on the 3D line view, and its model. positions/ and make_layout.py generate +#: the layout and stay in the checkout. +PACK_FILES = ("plant.toml", "line.json", "floor.json", "tag_map.json", "line_layout.json") +PACK_DIRS = ("masterdata", "models") MACHINES = 83 say, fail, ask, tell, until = base.say, base.fail, base.ask, base.tell, base.until @@ -64,7 +68,8 @@ def the_copies_are_copies(repo: Path, wheel: Path) -> None: zf.extractall(tmp) ours = Path(tmp) / base.SHIPPED / PLANT wanted = sorted([*PACK_FILES, *(p.relative_to(theirs).as_posix() - for p in (theirs / "masterdata").rglob("*") if p.is_file())]) + for d in PACK_DIRS + for p in (theirs / d).rglob("*") if p.is_file())]) got = sorted(p.relative_to(ours).as_posix() for p in ours.rglob("*") if p.is_file()) if wanted != got: fail(f"{PLANT}: the wheel's copy is not the lab's. In labs/{PLANT} but not the " diff --git a/docker/Dockerfile b/docker/Dockerfile index a93055b1..e1fee824 100644 --- a/docker/Dockerfile +++ b/docker/Dockerfile @@ -50,8 +50,11 @@ COPY labs/cutlery/plant.toml \ labs/cutlery/line.json \ labs/cutlery/floor.json \ labs/cutlery/tag_map.json \ + labs/cutlery/line_layout.json \ ./labs/cutlery/ COPY labs/cutlery/masterdata ./labs/cutlery/masterdata +# The 3D line view's machine models (2026-11-14), named by line_layout.json. +COPY labs/cutlery/models ./labs/cutlery/models # THE ASSISTANT FOLDERS, FOR THE SAME REASON. `pyproject.toml` force-includes # every file under `skills/` so that `fsmes skills unpack` works inside the diff --git a/labs/cutlery/README.md b/labs/cutlery/README.md index 78d5b9b1..472454a8 100644 --- a/labs/cutlery/README.md +++ b/labs/cutlery/README.md @@ -88,7 +88,9 @@ runs as a user service on port 5433; a scored run makes its own database - `build_config.py` writes `line.json` (83 stations, the inspection block per station: attributes, limits, sigma); `make_tag_map.py` derives - `tag_map.json`; `fsmes sim-generate` (or the runner) writes the CSVs + `tag_map.json`; `make_layout.py` derives `line_layout.json` (where each + machine stands on the 3D line view, and its model in `models/`) from + `positions/.json`, studio's plant design of 2026-11-12; `fsmes sim-generate` (or the runner) writes the CSVs under `out/`. - `init.py` seeds the master data, the dimensional specifications per utensil, and one released order per line with its resin or plate lot diff --git a/labs/cutlery/line_layout.json b/labs/cutlery/line_layout.json new file mode 100644 index 00000000..4d6e0a83 --- /dev/null +++ b/labs/cutlery/line_layout.json @@ -0,0 +1,833 @@ +{ + "_comment": "Geometry for the 3D line view of the cutlery plant: 83 machines on 61 lines, where studio's plant design puts them (positions/.json, metres, x along the plant, z across it). Each machine is drawn with the model named here from models/ beside this file. Written by make_layout.py - edit the positions files or the drawing they came from, not this one.", + "defaults": { + "unit_label": "unit" + }, + "lines": { + "FORK1LINE": { + "stations": { + "FORK1_Mold": { + "kind": "mold", + "x": 13.8, + "z": -5.6, + "rot": 0.0, + "model": "mold.glb" + }, + "FORK1_Degate": { + "kind": "degate", + "x": 20.2, + "z": -3.6, + "rot": 0.0, + "model": "degate.glb" + }, + "FORK1_Mark": { + "kind": "mark", + "x": 24.0, + "z": -3.6, + "rot": 0.0, + "model": "mark.glb" + } + } + }, + "FORK2LINE": { + "stations": { + "FORK2_Mold": { + "kind": "mold", + "x": 13.8, + "z": -11.1, + "rot": 0.0, + "model": "mold.glb" + }, + "FORK2_Degate": { + "kind": "degate", + "x": 20.2, + "z": -9.1, + "rot": 0.0, + "model": "degate.glb" + }, + "FORK2_Mark": { + "kind": "mark", + "x": 24.0, + "z": -9.1, + "rot": 0.0, + "model": "mark.glb" + } + } + }, + "FORK3LINE": { + "stations": { + "FORK3_Mold": { + "kind": "mold", + "x": 13.8, + "z": -16.6, + "rot": 0.0, + "model": "mold.glb" + }, + "FORK3_Degate": { + "kind": "degate", + "x": 20.2, + "z": -14.6, + "rot": 0.0, + "model": "degate.glb" + }, + "FORK3_Mark": { + "kind": "mark", + "x": 24.0, + "z": -14.6, + "rot": 0.0, + "model": "mark.glb" + } + } + }, + "KNIFE1LINE": { + "stations": { + "KNIFE1_Mold": { + "kind": "mold", + "x": 13.8, + "z": -53.6, + "rot": 0.0, + "model": "mold.glb" + }, + "KNIFE1_Degate": { + "kind": "degate", + "x": 20.2, + "z": -51.6, + "rot": 0.0, + "model": "degate.glb" + }, + "KNIFE1_Mark": { + "kind": "mark", + "x": 24.0, + "z": -51.6, + "rot": 0.0, + "model": "mark.glb" + } + } + }, + "KNIFE2LINE": { + "stations": { + "KNIFE2_Mold": { + "kind": "mold", + "x": 13.8, + "z": -59.1, + "rot": 0.0, + "model": "mold.glb" + }, + "KNIFE2_Degate": { + "kind": "degate", + "x": 20.2, + "z": -57.1, + "rot": 0.0, + "model": "degate.glb" + }, + "KNIFE2_Mark": { + "kind": "mark", + "x": 24.0, + "z": -57.1, + "rot": 0.0, + "model": "mark.glb" + } + } + }, + "KNIFE3LINE": { + "stations": { + "KNIFE3_Mold": { + "kind": "mold", + "x": 13.8, + "z": -64.6, + "rot": 0.0, + "model": "mold.glb" + }, + "KNIFE3_Degate": { + "kind": "degate", + "x": 20.2, + "z": -62.6, + "rot": 0.0, + "model": "degate.glb" + }, + "KNIFE3_Mark": { + "kind": "mark", + "x": 24.0, + "z": -62.6, + "rot": 0.0, + "model": "mark.glb" + } + } + }, + "PAL1LINE": { + "stations": { + "PAL1_Palletizer": { + "kind": "palletizer", + "x": 61.0, + "z": -10.0, + "rot": 0.0, + "model": "palletizer.glb" + }, + "PAL1_StretchWrap": { + "kind": "stretchwrap", + "x": 67.6, + "z": -11.6, + "rot": 90.0, + "model": "stretchwrap.glb" + } + } + }, + "PAL2LINE": { + "stations": { + "PAL2_Palletizer": { + "kind": "palletizer", + "x": 61.0, + "z": -34.0, + "rot": 0.0, + "model": "palletizer.glb" + }, + "PAL2_StretchWrap": { + "kind": "stretchwrap", + "x": 67.6, + "z": -35.6, + "rot": 90.0, + "model": "stretchwrap.glb" + } + } + }, + "PAL3LINE": { + "stations": { + "PAL3_Palletizer": { + "kind": "palletizer", + "x": 61.0, + "z": -54.0, + "rot": 0.0, + "model": "palletizer.glb" + }, + "PAL3_StretchWrap": { + "kind": "stretchwrap", + "x": 67.6, + "z": -55.6, + "rot": 90.0, + "model": "stretchwrap.glb" + } + } + }, + "PAL4LINE": { + "stations": { + "PAL4_Palletizer": { + "kind": "palletizer", + "x": 61.0, + "z": -63.0, + "rot": 0.0, + "model": "palletizer.glb" + }, + "PAL4_StretchWrap": { + "kind": "stretchwrap", + "x": 67.6, + "z": -64.6, + "rot": 90.0, + "model": "stretchwrap.glb" + } + } + }, + "SPOON1LINE": { + "stations": { + "SPOON1_Mold": { + "kind": "mold", + "x": 13.8, + "z": -29.6, + "rot": 0.0, + "model": "mold.glb" + }, + "SPOON1_Degate": { + "kind": "degate", + "x": 20.2, + "z": -27.6, + "rot": 0.0, + "model": "degate.glb" + }, + "SPOON1_Mark": { + "kind": "mark", + "x": 24.0, + "z": -27.6, + "rot": 0.0, + "model": "mark.glb" + } + } + }, + "SPOON2LINE": { + "stations": { + "SPOON2_Mold": { + "kind": "mold", + "x": 13.8, + "z": -35.1, + "rot": 0.0, + "model": "mold.glb" + }, + "SPOON2_Degate": { + "kind": "degate", + "x": 20.2, + "z": -33.1, + "rot": 0.0, + "model": "degate.glb" + }, + "SPOON2_Mark": { + "kind": "mark", + "x": 24.0, + "z": -33.1, + "rot": 0.0, + "model": "mark.glb" + } + } + }, + "SPOON3LINE": { + "stations": { + "SPOON3_Mold": { + "kind": "mold", + "x": 13.8, + "z": -40.6, + "rot": 0.0, + "model": "mold.glb" + }, + "SPOON3_Degate": { + "kind": "degate", + "x": 20.2, + "z": -38.6, + "rot": 0.0, + "model": "degate.glb" + }, + "SPOON3_Mark": { + "kind": "mark", + "x": 24.0, + "z": -38.6, + "rot": 0.0, + "model": "mark.glb" + } + } + }, + "STACK01LINE": { + "stations": { + "STACK01_Stacker": { + "kind": "stacker", + "x": 31.6, + "z": -4.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK02LINE": { + "stations": { + "STACK02_Stacker": { + "kind": "stacker", + "x": 34.6, + "z": -4.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK03LINE": { + "stations": { + "STACK03_Stacker": { + "kind": "stacker", + "x": 37.6, + "z": -4.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK04LINE": { + "stations": { + "STACK04_Stacker": { + "kind": "stacker", + "x": 40.6, + "z": -4.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK05LINE": { + "stations": { + "STACK05_Stacker": { + "kind": "stacker", + "x": 31.6, + "z": -10.1, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK06LINE": { + "stations": { + "STACK06_Stacker": { + "kind": "stacker", + "x": 34.6, + "z": -10.1, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK07LINE": { + "stations": { + "STACK07_Stacker": { + "kind": "stacker", + "x": 37.6, + "z": -10.1, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK08LINE": { + "stations": { + "STACK08_Stacker": { + "kind": "stacker", + "x": 40.6, + "z": -10.1, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK09LINE": { + "stations": { + "STACK09_Stacker": { + "kind": "stacker", + "x": 31.6, + "z": -15.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK10LINE": { + "stations": { + "STACK10_Stacker": { + "kind": "stacker", + "x": 34.6, + "z": -15.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK11LINE": { + "stations": { + "STACK11_Stacker": { + "kind": "stacker", + "x": 37.6, + "z": -15.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK12LINE": { + "stations": { + "STACK12_Stacker": { + "kind": "stacker", + "x": 40.6, + "z": -15.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK13LINE": { + "stations": { + "STACK13_Stacker": { + "kind": "stacker", + "x": 31.6, + "z": -28.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK14LINE": { + "stations": { + "STACK14_Stacker": { + "kind": "stacker", + "x": 34.6, + "z": -28.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK15LINE": { + "stations": { + "STACK15_Stacker": { + "kind": "stacker", + "x": 37.6, + "z": -28.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK16LINE": { + "stations": { + "STACK16_Stacker": { + "kind": "stacker", + "x": 40.6, + "z": -28.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK17LINE": { + "stations": { + "STACK17_Stacker": { + "kind": "stacker", + "x": 31.6, + "z": -34.1, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK18LINE": { + "stations": { + "STACK18_Stacker": { + "kind": "stacker", + "x": 34.6, + "z": -34.1, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK19LINE": { + "stations": { + "STACK19_Stacker": { + "kind": "stacker", + "x": 37.6, + "z": -34.1, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK20LINE": { + "stations": { + "STACK20_Stacker": { + "kind": "stacker", + "x": 40.6, + "z": -34.1, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK21LINE": { + "stations": { + "STACK21_Stacker": { + "kind": "stacker", + "x": 31.6, + "z": -39.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK22LINE": { + "stations": { + "STACK22_Stacker": { + "kind": "stacker", + "x": 34.6, + "z": -39.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK23LINE": { + "stations": { + "STACK23_Stacker": { + "kind": "stacker", + "x": 37.6, + "z": -39.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK24LINE": { + "stations": { + "STACK24_Stacker": { + "kind": "stacker", + "x": 40.6, + "z": -39.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK25LINE": { + "stations": { + "STACK25_Stacker": { + "kind": "stacker", + "x": 31.6, + "z": -52.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK26LINE": { + "stations": { + "STACK26_Stacker": { + "kind": "stacker", + "x": 34.6, + "z": -52.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK27LINE": { + "stations": { + "STACK27_Stacker": { + "kind": "stacker", + "x": 37.6, + "z": -52.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK28LINE": { + "stations": { + "STACK28_Stacker": { + "kind": "stacker", + "x": 40.6, + "z": -52.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK29LINE": { + "stations": { + "STACK29_Stacker": { + "kind": "stacker", + "x": 31.6, + "z": -58.1, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK30LINE": { + "stations": { + "STACK30_Stacker": { + "kind": "stacker", + "x": 34.6, + "z": -58.1, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK31LINE": { + "stations": { + "STACK31_Stacker": { + "kind": "stacker", + "x": 31.6, + "z": -63.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "STACK32LINE": { + "stations": { + "STACK32_Stacker": { + "kind": "stacker", + "x": 34.6, + "z": -63.6, + "rot": 0.0, + "model": "stacker.glb" + } + } + }, + "WRAP01LINE": { + "stations": { + "WRAP01_Wrapper": { + "kind": "wrapper", + "x": 48.4, + "z": -3.6, + "rot": 0.0, + "model": "wrapper.glb" + } + } + }, + "WRAP02LINE": { + "stations": { + "WRAP02_Wrapper": { + "kind": "wrapper", + "x": 48.4, + "z": -6.0, + "rot": 0.0, + "model": "wrapper.glb" + } + } + }, + "WRAP03LINE": { + "stations": { + "WRAP03_Wrapper": { + "kind": "wrapper", + "x": 48.4, + "z": -9.1, + "rot": 0.0, + "model": "wrapper.glb" + } + } + }, + "WRAP04LINE": { + "stations": { + "WRAP04_Wrapper": { + "kind": "wrapper", + "x": 48.4, + "z": -11.5, + "rot": 0.0, + "model": "wrapper.glb" + } + } + }, + "WRAP05LINE": { + "stations": { + "WRAP05_Wrapper": { + "kind": "wrapper", + "x": 48.4, + "z": -14.6, + "rot": 0.0, + "model": "wrapper.glb" + } + } + }, + "WRAP06LINE": { + "stations": { + "WRAP06_Wrapper": { + "kind": "wrapper", + "x": 48.4, + "z": -17.0, + "rot": 0.0, + "model": "wrapper.glb" + } + } + }, + "WRAP07LINE": { + "stations": { + "WRAP07_Wrapper": { + "kind": "wrapper", + "x": 48.4, + "z": -27.6, + "rot": 0.0, + "model": "wrapper.glb" + } + } + }, + "WRAP08LINE": { + "stations": { + "WRAP08_Wrapper": { + "kind": "wrapper", + "x": 48.4, + "z": -30.0, + "rot": 0.0, + "model": "wrapper.glb" + } + } + }, + "WRAP09LINE": { + "stations": { + "WRAP09_Wrapper": { + "kind": "wrapper", + "x": 48.4, + "z": -33.1, + "rot": 0.0, + "model": "wrapper.glb" + } + } + }, + "WRAP10LINE": { + "stations": { + "WRAP10_Wrapper": { + "kind": "wrapper", + "x": 48.4, + "z": -35.5, + "rot": 0.0, + "model": "wrapper.glb" + } + } + }, + "WRAP11LINE": { + "stations": { + "WRAP11_Wrapper": { + "kind": "wrapper", + "x": 48.4, + "z": -38.6, + "rot": 0.0, + "model": "wrapper.glb" + } + } + }, + "WRAP12LINE": { + "stations": { + "WRAP12_Wrapper": { + "kind": "wrapper", + "x": 48.4, + "z": -41.0, + "rot": 0.0, + "model": "wrapper.glb" + } + } + }, + "WRAP13LINE": { + "stations": { + "WRAP13_Wrapper": { + "kind": "wrapper", + "x": 48.4, + "z": -51.6, + "rot": 0.0, + "model": "wrapper.glb" + } + } + }, + "WRAP14LINE": { + "stations": { + "WRAP14_Wrapper": { + "kind": "wrapper", + "x": 48.4, + "z": -54.0, + "rot": 0.0, + "model": "wrapper.glb" + } + } + }, + "WRAP15LINE": { + "stations": { + "WRAP15_Wrapper": { + "kind": "wrapper", + "x": 48.4, + "z": -57.1, + "rot": 0.0, + "model": "wrapper.glb" + } + } + }, + "WRAP16LINE": { + "stations": { + "WRAP16_Wrapper": { + "kind": "wrapper", + "x": 48.4, + "z": -59.5, + "rot": 0.0, + "model": "wrapper.glb" + } + } + } + } +} diff --git a/labs/cutlery/make_layout.py b/labs/cutlery/make_layout.py new file mode 100644 index 00000000..f75e147a --- /dev/null +++ b/labs/cutlery/make_layout.py @@ -0,0 +1,66 @@ +"""Derive labs/cutlery/line_layout.json from positions/.json - where each +of the 83 machines stands on the 3D line view's floor, and which model it is +drawn with. + +The positions files are one per line, in the shape `fsmes layout from-freecad` +reads (docs/operate/packs.md, "Where the machines stand"): metres, x along the +plant, z across it, rot in degrees counter-clockwise from above. They came from +studio's own plant design on 2026-11-12, one entry per equipment code in +line.json, none missing, none extra. The seven models in `models/` are studio's +own generic massing - no vendor geometry, no logos. + +This script is the importer run once per line, so the layout and the drawing +always agree: `fsmes layout from-freecad positions/FORK1.json --layout +line_layout.json --line FORK1LINE --check` says every cell is unchanged. Each +line in the drawing is named by its line.json name (FORK1); the MES work +center is that name with LINE on the end (FORK1LINE), as init.py seeds it. A +station's kind is the drawing's kind in lowercase (mold, degate, mark, stacker, +wrapper, palletizer, stretchwrap): the view has no built-in shape for those, so +without its model it would be drawn as a plain box - the model is what shows. +The belts carry the view's small default unit, not a fork: a cutlery piece on +the belt is a later job, after 2026-11-20. + + python3 labs/cutlery/make_layout.py + python3 labs/cutlery/make_layout.py the positions/ in , line_layout.json beside it +""" +import json +import sys +from pathlib import Path + +from fsmes.services import layout_import + +HERE = Path(__file__).resolve().parent + +COMMENT = ( + "Geometry for the 3D line view of the cutlery plant: 83 machines on 61 lines, " + "where studio's plant design puts them (positions/.json, metres, x along " + "the plant, z across it). Each machine is drawn with the model named here from " + "models/ beside this file. Written by make_layout.py - edit the positions files " + "or the drawing they came from, not this one." +) + + +def main(root: Path) -> None: + layout = {"_comment": COMMENT, "defaults": {"unit_label": "unit"}, "lines": {}} + files = sorted((root / "positions").glob("*.json")) + if not files: + sys.exit(f"no positions files in {root / 'positions'}") + total = 0 + for path in files: + drawn = layout_import.read_positions(path) + kinds = {c["code"]: c.get("kind") for c in json.loads(path.read_text(encoding="utf-8-sig"))["cells"]} + line = f"{drawn.line}LINE" + layout, report = layout_import.apply(layout, drawn, line) + stations = layout["lines"][line]["stations"] + for cell in drawn.cells: + kind = kinds.get(cell.code) + if isinstance(kind, str) and kind: + stations[cell.code]["kind"] = kind.lower() + total += len(report.changes) + out = root / "line_layout.json" + layout_import.write_layout(out, layout) + print(f"{out}: {len(files)} lines, {total} machines") + + +if __name__ == "__main__": + main(Path(sys.argv[1]).resolve() if len(sys.argv) > 1 else HERE) diff --git a/labs/cutlery/models/degate.glb b/labs/cutlery/models/degate.glb new file mode 100644 index 00000000..558729c0 Binary files /dev/null and b/labs/cutlery/models/degate.glb differ diff --git a/labs/cutlery/models/mark.glb b/labs/cutlery/models/mark.glb new file mode 100644 index 00000000..c309ef5d Binary files /dev/null and b/labs/cutlery/models/mark.glb differ diff --git a/labs/cutlery/models/mold.glb b/labs/cutlery/models/mold.glb new file mode 100644 index 00000000..95aa06cd Binary files /dev/null and b/labs/cutlery/models/mold.glb differ diff --git a/labs/cutlery/models/palletizer.glb b/labs/cutlery/models/palletizer.glb new file mode 100644 index 00000000..767c73d3 Binary files /dev/null and b/labs/cutlery/models/palletizer.glb differ diff --git a/labs/cutlery/models/stacker.glb b/labs/cutlery/models/stacker.glb new file mode 100644 index 00000000..b410108e Binary files /dev/null and b/labs/cutlery/models/stacker.glb differ diff --git a/labs/cutlery/models/stretchwrap.glb b/labs/cutlery/models/stretchwrap.glb new file mode 100644 index 00000000..1a4b5c0c Binary files /dev/null and b/labs/cutlery/models/stretchwrap.glb differ diff --git a/labs/cutlery/models/wrapper.glb b/labs/cutlery/models/wrapper.glb new file mode 100644 index 00000000..13da33fa Binary files /dev/null and b/labs/cutlery/models/wrapper.glb differ diff --git a/labs/cutlery/plant.toml b/labs/cutlery/plant.toml index ecb9a56f..9b9bad7e 100644 --- a/labs/cutlery/plant.toml +++ b/labs/cutlery/plant.toml @@ -45,6 +45,9 @@ speed = 1 [files] tag_map = "tag_map.json" +# Where the 83 machines stand on the 3D line view, and the model each is drawn +# with from models/ beside it. Written by make_layout.py from positions/. +line_layout = "line_layout.json" replay_dir = "out" # The plant itself, as data. Six of its files are generated by init.py from # line.json; the two vocabularies - the words an operator picks from when a diff --git a/labs/cutlery/positions/FORK1.json b/labs/cutlery/positions/FORK1.json new file mode 100644 index 00000000..a6199df1 --- /dev/null +++ b/labs/cutlery/positions/FORK1.json @@ -0,0 +1,41 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "FORK1", + "cells": [ + { + "code": "FORK1_Mold", + "line": "FORK1", + "x": 13.8, + "z": -5.6, + "rot": 0.0, + "model": "mold.glb", + "kind": "Mold" + }, + { + "code": "FORK1_Degate", + "line": "FORK1", + "x": 20.2, + "z": -3.6, + "rot": 0.0, + "model": "degate.glb", + "kind": "Degate" + }, + { + "code": "FORK1_Mark", + "line": "FORK1", + "x": 24.0, + "z": -3.6, + "rot": 0.0, + "model": "mark.glb", + "kind": "Mark" + } + ] +} diff --git a/labs/cutlery/positions/FORK2.json b/labs/cutlery/positions/FORK2.json new file mode 100644 index 00000000..9b0874b4 --- /dev/null +++ b/labs/cutlery/positions/FORK2.json @@ -0,0 +1,41 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "FORK2", + "cells": [ + { + "code": "FORK2_Mold", + "line": "FORK2", + "x": 13.8, + "z": -11.1, + "rot": 0.0, + "model": "mold.glb", + "kind": "Mold" + }, + { + "code": "FORK2_Degate", + "line": "FORK2", + "x": 20.2, + "z": -9.1, + "rot": 0.0, + "model": "degate.glb", + "kind": "Degate" + }, + { + "code": "FORK2_Mark", + "line": "FORK2", + "x": 24.0, + "z": -9.1, + "rot": 0.0, + "model": "mark.glb", + "kind": "Mark" + } + ] +} diff --git a/labs/cutlery/positions/FORK3.json b/labs/cutlery/positions/FORK3.json new file mode 100644 index 00000000..c1ac89f9 --- /dev/null +++ b/labs/cutlery/positions/FORK3.json @@ -0,0 +1,41 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "FORK3", + "cells": [ + { + "code": "FORK3_Mold", + "line": "FORK3", + "x": 13.8, + "z": -16.6, + "rot": 0.0, + "model": "mold.glb", + "kind": "Mold" + }, + { + "code": "FORK3_Degate", + "line": "FORK3", + "x": 20.2, + "z": -14.6, + "rot": 0.0, + "model": "degate.glb", + "kind": "Degate" + }, + { + "code": "FORK3_Mark", + "line": "FORK3", + "x": 24.0, + "z": -14.6, + "rot": 0.0, + "model": "mark.glb", + "kind": "Mark" + } + ] +} diff --git a/labs/cutlery/positions/KNIFE1.json b/labs/cutlery/positions/KNIFE1.json new file mode 100644 index 00000000..2d278699 --- /dev/null +++ b/labs/cutlery/positions/KNIFE1.json @@ -0,0 +1,41 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "KNIFE1", + "cells": [ + { + "code": "KNIFE1_Mold", + "line": "KNIFE1", + "x": 13.8, + "z": -53.6, + "rot": 0.0, + "model": "mold.glb", + "kind": "Mold" + }, + { + "code": "KNIFE1_Degate", + "line": "KNIFE1", + "x": 20.2, + "z": -51.6, + "rot": 0.0, + "model": "degate.glb", + "kind": "Degate" + }, + { + "code": "KNIFE1_Mark", + "line": "KNIFE1", + "x": 24.0, + "z": -51.6, + "rot": 0.0, + "model": "mark.glb", + "kind": "Mark" + } + ] +} diff --git a/labs/cutlery/positions/KNIFE2.json b/labs/cutlery/positions/KNIFE2.json new file mode 100644 index 00000000..5bf99c00 --- /dev/null +++ b/labs/cutlery/positions/KNIFE2.json @@ -0,0 +1,41 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "KNIFE2", + "cells": [ + { + "code": "KNIFE2_Mold", + "line": "KNIFE2", + "x": 13.8, + "z": -59.1, + "rot": 0.0, + "model": "mold.glb", + "kind": "Mold" + }, + { + "code": "KNIFE2_Degate", + "line": "KNIFE2", + "x": 20.2, + "z": -57.1, + "rot": 0.0, + "model": "degate.glb", + "kind": "Degate" + }, + { + "code": "KNIFE2_Mark", + "line": "KNIFE2", + "x": 24.0, + "z": -57.1, + "rot": 0.0, + "model": "mark.glb", + "kind": "Mark" + } + ] +} diff --git a/labs/cutlery/positions/KNIFE3.json b/labs/cutlery/positions/KNIFE3.json new file mode 100644 index 00000000..d32e204c --- /dev/null +++ b/labs/cutlery/positions/KNIFE3.json @@ -0,0 +1,41 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "KNIFE3", + "cells": [ + { + "code": "KNIFE3_Mold", + "line": "KNIFE3", + "x": 13.8, + "z": -64.6, + "rot": 0.0, + "model": "mold.glb", + "kind": "Mold" + }, + { + "code": "KNIFE3_Degate", + "line": "KNIFE3", + "x": 20.2, + "z": -62.6, + "rot": 0.0, + "model": "degate.glb", + "kind": "Degate" + }, + { + "code": "KNIFE3_Mark", + "line": "KNIFE3", + "x": 24.0, + "z": -62.6, + "rot": 0.0, + "model": "mark.glb", + "kind": "Mark" + } + ] +} diff --git a/labs/cutlery/positions/PAL1.json b/labs/cutlery/positions/PAL1.json new file mode 100644 index 00000000..fd9a2f67 --- /dev/null +++ b/labs/cutlery/positions/PAL1.json @@ -0,0 +1,32 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "PAL1", + "cells": [ + { + "code": "PAL1_Palletizer", + "line": "PAL1", + "x": 61.0, + "z": -10.0, + "rot": 0.0, + "model": "palletizer.glb", + "kind": "Palletizer" + }, + { + "code": "PAL1_StretchWrap", + "line": "PAL1", + "x": 67.6, + "z": -11.6, + "rot": 90.0, + "model": "stretchwrap.glb", + "kind": "StretchWrap" + } + ] +} diff --git a/labs/cutlery/positions/PAL2.json b/labs/cutlery/positions/PAL2.json new file mode 100644 index 00000000..c172b8a6 --- /dev/null +++ b/labs/cutlery/positions/PAL2.json @@ -0,0 +1,32 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "PAL2", + "cells": [ + { + "code": "PAL2_Palletizer", + "line": "PAL2", + "x": 61.0, + "z": -34.0, + "rot": 0.0, + "model": "palletizer.glb", + "kind": "Palletizer" + }, + { + "code": "PAL2_StretchWrap", + "line": "PAL2", + "x": 67.6, + "z": -35.6, + "rot": 90.0, + "model": "stretchwrap.glb", + "kind": "StretchWrap" + } + ] +} diff --git a/labs/cutlery/positions/PAL3.json b/labs/cutlery/positions/PAL3.json new file mode 100644 index 00000000..769bb548 --- /dev/null +++ b/labs/cutlery/positions/PAL3.json @@ -0,0 +1,32 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "PAL3", + "cells": [ + { + "code": "PAL3_Palletizer", + "line": "PAL3", + "x": 61.0, + "z": -54.0, + "rot": 0.0, + "model": "palletizer.glb", + "kind": "Palletizer" + }, + { + "code": "PAL3_StretchWrap", + "line": "PAL3", + "x": 67.6, + "z": -55.6, + "rot": 90.0, + "model": "stretchwrap.glb", + "kind": "StretchWrap" + } + ] +} diff --git a/labs/cutlery/positions/PAL4.json b/labs/cutlery/positions/PAL4.json new file mode 100644 index 00000000..728cc741 --- /dev/null +++ b/labs/cutlery/positions/PAL4.json @@ -0,0 +1,32 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "PAL4", + "cells": [ + { + "code": "PAL4_Palletizer", + "line": "PAL4", + "x": 61.0, + "z": -63.0, + "rot": 0.0, + "model": "palletizer.glb", + "kind": "Palletizer" + }, + { + "code": "PAL4_StretchWrap", + "line": "PAL4", + "x": 67.6, + "z": -64.6, + "rot": 90.0, + "model": "stretchwrap.glb", + "kind": "StretchWrap" + } + ] +} diff --git a/labs/cutlery/positions/SPOON1.json b/labs/cutlery/positions/SPOON1.json new file mode 100644 index 00000000..5fa4c3b8 --- /dev/null +++ b/labs/cutlery/positions/SPOON1.json @@ -0,0 +1,41 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "SPOON1", + "cells": [ + { + "code": "SPOON1_Mold", + "line": "SPOON1", + "x": 13.8, + "z": -29.6, + "rot": 0.0, + "model": "mold.glb", + "kind": "Mold" + }, + { + "code": "SPOON1_Degate", + "line": "SPOON1", + "x": 20.2, + "z": -27.6, + "rot": 0.0, + "model": "degate.glb", + "kind": "Degate" + }, + { + "code": "SPOON1_Mark", + "line": "SPOON1", + "x": 24.0, + "z": -27.6, + "rot": 0.0, + "model": "mark.glb", + "kind": "Mark" + } + ] +} diff --git a/labs/cutlery/positions/SPOON2.json b/labs/cutlery/positions/SPOON2.json new file mode 100644 index 00000000..cd3eb68b --- /dev/null +++ b/labs/cutlery/positions/SPOON2.json @@ -0,0 +1,41 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "SPOON2", + "cells": [ + { + "code": "SPOON2_Mold", + "line": "SPOON2", + "x": 13.8, + "z": -35.1, + "rot": 0.0, + "model": "mold.glb", + "kind": "Mold" + }, + { + "code": "SPOON2_Degate", + "line": "SPOON2", + "x": 20.2, + "z": -33.1, + "rot": 0.0, + "model": "degate.glb", + "kind": "Degate" + }, + { + "code": "SPOON2_Mark", + "line": "SPOON2", + "x": 24.0, + "z": -33.1, + "rot": 0.0, + "model": "mark.glb", + "kind": "Mark" + } + ] +} diff --git a/labs/cutlery/positions/SPOON3.json b/labs/cutlery/positions/SPOON3.json new file mode 100644 index 00000000..26b2848e --- /dev/null +++ b/labs/cutlery/positions/SPOON3.json @@ -0,0 +1,41 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "SPOON3", + "cells": [ + { + "code": "SPOON3_Mold", + "line": "SPOON3", + "x": 13.8, + "z": -40.6, + "rot": 0.0, + "model": "mold.glb", + "kind": "Mold" + }, + { + "code": "SPOON3_Degate", + "line": "SPOON3", + "x": 20.2, + "z": -38.6, + "rot": 0.0, + "model": "degate.glb", + "kind": "Degate" + }, + { + "code": "SPOON3_Mark", + "line": "SPOON3", + "x": 24.0, + "z": -38.6, + "rot": 0.0, + "model": "mark.glb", + "kind": "Mark" + } + ] +} diff --git a/labs/cutlery/positions/STACK01.json b/labs/cutlery/positions/STACK01.json new file mode 100644 index 00000000..d8e3b152 --- /dev/null +++ b/labs/cutlery/positions/STACK01.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK01", + "cells": [ + { + "code": "STACK01_Stacker", + "line": "STACK01", + "x": 31.6, + "z": -4.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK02.json b/labs/cutlery/positions/STACK02.json new file mode 100644 index 00000000..935d1f71 --- /dev/null +++ b/labs/cutlery/positions/STACK02.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK02", + "cells": [ + { + "code": "STACK02_Stacker", + "line": "STACK02", + "x": 34.6, + "z": -4.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK03.json b/labs/cutlery/positions/STACK03.json new file mode 100644 index 00000000..d80b5f09 --- /dev/null +++ b/labs/cutlery/positions/STACK03.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK03", + "cells": [ + { + "code": "STACK03_Stacker", + "line": "STACK03", + "x": 37.6, + "z": -4.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK04.json b/labs/cutlery/positions/STACK04.json new file mode 100644 index 00000000..934bbcb3 --- /dev/null +++ b/labs/cutlery/positions/STACK04.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK04", + "cells": [ + { + "code": "STACK04_Stacker", + "line": "STACK04", + "x": 40.6, + "z": -4.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK05.json b/labs/cutlery/positions/STACK05.json new file mode 100644 index 00000000..25d6d198 --- /dev/null +++ b/labs/cutlery/positions/STACK05.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK05", + "cells": [ + { + "code": "STACK05_Stacker", + "line": "STACK05", + "x": 31.6, + "z": -10.1, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK06.json b/labs/cutlery/positions/STACK06.json new file mode 100644 index 00000000..9e902463 --- /dev/null +++ b/labs/cutlery/positions/STACK06.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK06", + "cells": [ + { + "code": "STACK06_Stacker", + "line": "STACK06", + "x": 34.6, + "z": -10.1, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK07.json b/labs/cutlery/positions/STACK07.json new file mode 100644 index 00000000..cc550728 --- /dev/null +++ b/labs/cutlery/positions/STACK07.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK07", + "cells": [ + { + "code": "STACK07_Stacker", + "line": "STACK07", + "x": 37.6, + "z": -10.1, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK08.json b/labs/cutlery/positions/STACK08.json new file mode 100644 index 00000000..d84e88df --- /dev/null +++ b/labs/cutlery/positions/STACK08.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK08", + "cells": [ + { + "code": "STACK08_Stacker", + "line": "STACK08", + "x": 40.6, + "z": -10.1, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK09.json b/labs/cutlery/positions/STACK09.json new file mode 100644 index 00000000..e3eb7552 --- /dev/null +++ b/labs/cutlery/positions/STACK09.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK09", + "cells": [ + { + "code": "STACK09_Stacker", + "line": "STACK09", + "x": 31.6, + "z": -15.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK10.json b/labs/cutlery/positions/STACK10.json new file mode 100644 index 00000000..52859f9c --- /dev/null +++ b/labs/cutlery/positions/STACK10.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK10", + "cells": [ + { + "code": "STACK10_Stacker", + "line": "STACK10", + "x": 34.6, + "z": -15.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK11.json b/labs/cutlery/positions/STACK11.json new file mode 100644 index 00000000..b80bf47f --- /dev/null +++ b/labs/cutlery/positions/STACK11.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK11", + "cells": [ + { + "code": "STACK11_Stacker", + "line": "STACK11", + "x": 37.6, + "z": -15.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK12.json b/labs/cutlery/positions/STACK12.json new file mode 100644 index 00000000..7fa831b1 --- /dev/null +++ b/labs/cutlery/positions/STACK12.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK12", + "cells": [ + { + "code": "STACK12_Stacker", + "line": "STACK12", + "x": 40.6, + "z": -15.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK13.json b/labs/cutlery/positions/STACK13.json new file mode 100644 index 00000000..ca90066c --- /dev/null +++ b/labs/cutlery/positions/STACK13.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK13", + "cells": [ + { + "code": "STACK13_Stacker", + "line": "STACK13", + "x": 31.6, + "z": -28.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK14.json b/labs/cutlery/positions/STACK14.json new file mode 100644 index 00000000..38c38257 --- /dev/null +++ b/labs/cutlery/positions/STACK14.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK14", + "cells": [ + { + "code": "STACK14_Stacker", + "line": "STACK14", + "x": 34.6, + "z": -28.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK15.json b/labs/cutlery/positions/STACK15.json new file mode 100644 index 00000000..2876c5c9 --- /dev/null +++ b/labs/cutlery/positions/STACK15.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK15", + "cells": [ + { + "code": "STACK15_Stacker", + "line": "STACK15", + "x": 37.6, + "z": -28.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK16.json b/labs/cutlery/positions/STACK16.json new file mode 100644 index 00000000..2f366943 --- /dev/null +++ b/labs/cutlery/positions/STACK16.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK16", + "cells": [ + { + "code": "STACK16_Stacker", + "line": "STACK16", + "x": 40.6, + "z": -28.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK17.json b/labs/cutlery/positions/STACK17.json new file mode 100644 index 00000000..37dbe31f --- /dev/null +++ b/labs/cutlery/positions/STACK17.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK17", + "cells": [ + { + "code": "STACK17_Stacker", + "line": "STACK17", + "x": 31.6, + "z": -34.1, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK18.json b/labs/cutlery/positions/STACK18.json new file mode 100644 index 00000000..e498fa9f --- /dev/null +++ b/labs/cutlery/positions/STACK18.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK18", + "cells": [ + { + "code": "STACK18_Stacker", + "line": "STACK18", + "x": 34.6, + "z": -34.1, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK19.json b/labs/cutlery/positions/STACK19.json new file mode 100644 index 00000000..8d9c24ac --- /dev/null +++ b/labs/cutlery/positions/STACK19.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK19", + "cells": [ + { + "code": "STACK19_Stacker", + "line": "STACK19", + "x": 37.6, + "z": -34.1, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK20.json b/labs/cutlery/positions/STACK20.json new file mode 100644 index 00000000..65bb5126 --- /dev/null +++ b/labs/cutlery/positions/STACK20.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK20", + "cells": [ + { + "code": "STACK20_Stacker", + "line": "STACK20", + "x": 40.6, + "z": -34.1, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK21.json b/labs/cutlery/positions/STACK21.json new file mode 100644 index 00000000..28cd409e --- /dev/null +++ b/labs/cutlery/positions/STACK21.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK21", + "cells": [ + { + "code": "STACK21_Stacker", + "line": "STACK21", + "x": 31.6, + "z": -39.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK22.json b/labs/cutlery/positions/STACK22.json new file mode 100644 index 00000000..8f058a39 --- /dev/null +++ b/labs/cutlery/positions/STACK22.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK22", + "cells": [ + { + "code": "STACK22_Stacker", + "line": "STACK22", + "x": 34.6, + "z": -39.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK23.json b/labs/cutlery/positions/STACK23.json new file mode 100644 index 00000000..2116ffd2 --- /dev/null +++ b/labs/cutlery/positions/STACK23.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK23", + "cells": [ + { + "code": "STACK23_Stacker", + "line": "STACK23", + "x": 37.6, + "z": -39.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK24.json b/labs/cutlery/positions/STACK24.json new file mode 100644 index 00000000..3525faf1 --- /dev/null +++ b/labs/cutlery/positions/STACK24.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK24", + "cells": [ + { + "code": "STACK24_Stacker", + "line": "STACK24", + "x": 40.6, + "z": -39.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK25.json b/labs/cutlery/positions/STACK25.json new file mode 100644 index 00000000..073dd864 --- /dev/null +++ b/labs/cutlery/positions/STACK25.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK25", + "cells": [ + { + "code": "STACK25_Stacker", + "line": "STACK25", + "x": 31.6, + "z": -52.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK26.json b/labs/cutlery/positions/STACK26.json new file mode 100644 index 00000000..34b13451 --- /dev/null +++ b/labs/cutlery/positions/STACK26.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK26", + "cells": [ + { + "code": "STACK26_Stacker", + "line": "STACK26", + "x": 34.6, + "z": -52.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK27.json b/labs/cutlery/positions/STACK27.json new file mode 100644 index 00000000..a51a4e38 --- /dev/null +++ b/labs/cutlery/positions/STACK27.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK27", + "cells": [ + { + "code": "STACK27_Stacker", + "line": "STACK27", + "x": 37.6, + "z": -52.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK28.json b/labs/cutlery/positions/STACK28.json new file mode 100644 index 00000000..0cfebd1b --- /dev/null +++ b/labs/cutlery/positions/STACK28.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK28", + "cells": [ + { + "code": "STACK28_Stacker", + "line": "STACK28", + "x": 40.6, + "z": -52.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK29.json b/labs/cutlery/positions/STACK29.json new file mode 100644 index 00000000..79ee0f9d --- /dev/null +++ b/labs/cutlery/positions/STACK29.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK29", + "cells": [ + { + "code": "STACK29_Stacker", + "line": "STACK29", + "x": 31.6, + "z": -58.1, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK30.json b/labs/cutlery/positions/STACK30.json new file mode 100644 index 00000000..80c93193 --- /dev/null +++ b/labs/cutlery/positions/STACK30.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK30", + "cells": [ + { + "code": "STACK30_Stacker", + "line": "STACK30", + "x": 34.6, + "z": -58.1, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK31.json b/labs/cutlery/positions/STACK31.json new file mode 100644 index 00000000..f2b49b50 --- /dev/null +++ b/labs/cutlery/positions/STACK31.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK31", + "cells": [ + { + "code": "STACK31_Stacker", + "line": "STACK31", + "x": 31.6, + "z": -63.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/STACK32.json b/labs/cutlery/positions/STACK32.json new file mode 100644 index 00000000..b861ce46 --- /dev/null +++ b/labs/cutlery/positions/STACK32.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "STACK32", + "cells": [ + { + "code": "STACK32_Stacker", + "line": "STACK32", + "x": 34.6, + "z": -63.6, + "rot": 0.0, + "model": "stacker.glb", + "kind": "Stacker" + } + ] +} diff --git a/labs/cutlery/positions/WRAP01.json b/labs/cutlery/positions/WRAP01.json new file mode 100644 index 00000000..cb51d6d6 --- /dev/null +++ b/labs/cutlery/positions/WRAP01.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "WRAP01", + "cells": [ + { + "code": "WRAP01_Wrapper", + "line": "WRAP01", + "x": 48.4, + "z": -3.6, + "rot": 0.0, + "model": "wrapper.glb", + "kind": "Wrapper" + } + ] +} diff --git a/labs/cutlery/positions/WRAP02.json b/labs/cutlery/positions/WRAP02.json new file mode 100644 index 00000000..6cc8d7ce --- /dev/null +++ b/labs/cutlery/positions/WRAP02.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "WRAP02", + "cells": [ + { + "code": "WRAP02_Wrapper", + "line": "WRAP02", + "x": 48.4, + "z": -6.0, + "rot": 0.0, + "model": "wrapper.glb", + "kind": "Wrapper" + } + ] +} diff --git a/labs/cutlery/positions/WRAP03.json b/labs/cutlery/positions/WRAP03.json new file mode 100644 index 00000000..79562d0b --- /dev/null +++ b/labs/cutlery/positions/WRAP03.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "WRAP03", + "cells": [ + { + "code": "WRAP03_Wrapper", + "line": "WRAP03", + "x": 48.4, + "z": -9.1, + "rot": 0.0, + "model": "wrapper.glb", + "kind": "Wrapper" + } + ] +} diff --git a/labs/cutlery/positions/WRAP04.json b/labs/cutlery/positions/WRAP04.json new file mode 100644 index 00000000..d9cb2140 --- /dev/null +++ b/labs/cutlery/positions/WRAP04.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "WRAP04", + "cells": [ + { + "code": "WRAP04_Wrapper", + "line": "WRAP04", + "x": 48.4, + "z": -11.5, + "rot": 0.0, + "model": "wrapper.glb", + "kind": "Wrapper" + } + ] +} diff --git a/labs/cutlery/positions/WRAP05.json b/labs/cutlery/positions/WRAP05.json new file mode 100644 index 00000000..7da68e1c --- /dev/null +++ b/labs/cutlery/positions/WRAP05.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "WRAP05", + "cells": [ + { + "code": "WRAP05_Wrapper", + "line": "WRAP05", + "x": 48.4, + "z": -14.6, + "rot": 0.0, + "model": "wrapper.glb", + "kind": "Wrapper" + } + ] +} diff --git a/labs/cutlery/positions/WRAP06.json b/labs/cutlery/positions/WRAP06.json new file mode 100644 index 00000000..c9686c2d --- /dev/null +++ b/labs/cutlery/positions/WRAP06.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "WRAP06", + "cells": [ + { + "code": "WRAP06_Wrapper", + "line": "WRAP06", + "x": 48.4, + "z": -17.0, + "rot": 0.0, + "model": "wrapper.glb", + "kind": "Wrapper" + } + ] +} diff --git a/labs/cutlery/positions/WRAP07.json b/labs/cutlery/positions/WRAP07.json new file mode 100644 index 00000000..0a30f579 --- /dev/null +++ b/labs/cutlery/positions/WRAP07.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "WRAP07", + "cells": [ + { + "code": "WRAP07_Wrapper", + "line": "WRAP07", + "x": 48.4, + "z": -27.6, + "rot": 0.0, + "model": "wrapper.glb", + "kind": "Wrapper" + } + ] +} diff --git a/labs/cutlery/positions/WRAP08.json b/labs/cutlery/positions/WRAP08.json new file mode 100644 index 00000000..f7d417f3 --- /dev/null +++ b/labs/cutlery/positions/WRAP08.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "WRAP08", + "cells": [ + { + "code": "WRAP08_Wrapper", + "line": "WRAP08", + "x": 48.4, + "z": -30.0, + "rot": 0.0, + "model": "wrapper.glb", + "kind": "Wrapper" + } + ] +} diff --git a/labs/cutlery/positions/WRAP09.json b/labs/cutlery/positions/WRAP09.json new file mode 100644 index 00000000..8ade7c11 --- /dev/null +++ b/labs/cutlery/positions/WRAP09.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "WRAP09", + "cells": [ + { + "code": "WRAP09_Wrapper", + "line": "WRAP09", + "x": 48.4, + "z": -33.1, + "rot": 0.0, + "model": "wrapper.glb", + "kind": "Wrapper" + } + ] +} diff --git a/labs/cutlery/positions/WRAP10.json b/labs/cutlery/positions/WRAP10.json new file mode 100644 index 00000000..6558763a --- /dev/null +++ b/labs/cutlery/positions/WRAP10.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "WRAP10", + "cells": [ + { + "code": "WRAP10_Wrapper", + "line": "WRAP10", + "x": 48.4, + "z": -35.5, + "rot": 0.0, + "model": "wrapper.glb", + "kind": "Wrapper" + } + ] +} diff --git a/labs/cutlery/positions/WRAP11.json b/labs/cutlery/positions/WRAP11.json new file mode 100644 index 00000000..18d8f40b --- /dev/null +++ b/labs/cutlery/positions/WRAP11.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "WRAP11", + "cells": [ + { + "code": "WRAP11_Wrapper", + "line": "WRAP11", + "x": 48.4, + "z": -38.6, + "rot": 0.0, + "model": "wrapper.glb", + "kind": "Wrapper" + } + ] +} diff --git a/labs/cutlery/positions/WRAP12.json b/labs/cutlery/positions/WRAP12.json new file mode 100644 index 00000000..469323f8 --- /dev/null +++ b/labs/cutlery/positions/WRAP12.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "WRAP12", + "cells": [ + { + "code": "WRAP12_Wrapper", + "line": "WRAP12", + "x": 48.4, + "z": -41.0, + "rot": 0.0, + "model": "wrapper.glb", + "kind": "Wrapper" + } + ] +} diff --git a/labs/cutlery/positions/WRAP13.json b/labs/cutlery/positions/WRAP13.json new file mode 100644 index 00000000..6687062d --- /dev/null +++ b/labs/cutlery/positions/WRAP13.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "WRAP13", + "cells": [ + { + "code": "WRAP13_Wrapper", + "line": "WRAP13", + "x": 48.4, + "z": -51.6, + "rot": 0.0, + "model": "wrapper.glb", + "kind": "Wrapper" + } + ] +} diff --git a/labs/cutlery/positions/WRAP14.json b/labs/cutlery/positions/WRAP14.json new file mode 100644 index 00000000..7bf8dbc5 --- /dev/null +++ b/labs/cutlery/positions/WRAP14.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "WRAP14", + "cells": [ + { + "code": "WRAP14_Wrapper", + "line": "WRAP14", + "x": 48.4, + "z": -54.0, + "rot": 0.0, + "model": "wrapper.glb", + "kind": "Wrapper" + } + ] +} diff --git a/labs/cutlery/positions/WRAP15.json b/labs/cutlery/positions/WRAP15.json new file mode 100644 index 00000000..ab37b652 --- /dev/null +++ b/labs/cutlery/positions/WRAP15.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "WRAP15", + "cells": [ + { + "code": "WRAP15_Wrapper", + "line": "WRAP15", + "x": 48.4, + "z": -57.1, + "rot": 0.0, + "model": "wrapper.glb", + "kind": "Wrapper" + } + ] +} diff --git a/labs/cutlery/positions/WRAP16.json b/labs/cutlery/positions/WRAP16.json new file mode 100644 index 00000000..276fecbb --- /dev/null +++ b/labs/cutlery/positions/WRAP16.json @@ -0,0 +1,23 @@ +{ + "units": "m", + "frame": { + "x": "FreeCAD X", + "z": "-FreeCAD Y", + "y": "up", + "front": "-Z", + "rot": "degrees about vertical, CCW from above" + }, + "source": "studio's cutlery plant design (layout.json), delivered 2026-11-12; frame x = plant X, z = -plant Y", + "line": "WRAP16", + "cells": [ + { + "code": "WRAP16_Wrapper", + "line": "WRAP16", + "x": 48.4, + "z": -59.5, + "rot": 0.0, + "model": "wrapper.glb", + "kind": "Wrapper" + } + ] +} diff --git a/pyproject.toml b/pyproject.toml index 09289596..d4c81381 100644 --- a/pyproject.toml +++ b/pyproject.toml @@ -178,6 +178,11 @@ packages = ["src/fsmes"] "labs/cutlery/floor.json" = "fsmes/data/packs/cutlery/floor.json" "labs/cutlery/tag_map.json" = "fsmes/data/packs/cutlery/tag_map.json" "labs/cutlery/masterdata" = "fsmes/data/packs/cutlery/masterdata" +# The 3D line view's layout and studio's seven machine models (2026-11-14): +# plant.toml names line_layout.json, so the wheel must carry it, and the +# models beside it. positions/ and make_layout.py are the generators and stay. +"labs/cutlery/line_layout.json" = "fsmes/data/packs/cutlery/line_layout.json" +"labs/cutlery/models" = "fsmes/data/packs/cutlery/models" # THE ASSISTANT FOLDER, INSIDE THE WHEEL. `fsmes skills unpack plant-from-your-mes # ` writes it out on a machine with no checkout and no internet, which is diff --git a/tests/test_the_wheel_ships_the_lab_packs.py b/tests/test_the_wheel_ships_the_lab_packs.py index 4d6b22e0..92bdf637 100644 --- a/tests/test_the_wheel_ships_the_lab_packs.py +++ b/tests/test_the_wheel_ships_the_lab_packs.py @@ -35,7 +35,8 @@ "cutlery": "labs/cutlery"} #: For a pack whose folder holds more than the pack: the files that are the #: pack. Everything else in that folder is the lab's tooling and stays home. -PACK_FILES = {"cutlery": ("plant.toml", "line.json", "floor.json", "tag_map.json", "masterdata")} +PACK_FILES = {"cutlery": ("plant.toml", "line.json", "floor.json", "tag_map.json", "masterdata", + "line_layout.json", "models")} #: Where the packs land inside the wheel. UNDER = "fsmes/data/packs"