lte-softmodem.c

/*
 * SPDX-License-Identifier: LicenseRef-CSSL-1.0
 */

/*!
 * \brief Top-level threads for eNodeB
 */


#define _GNU_SOURCE             /* See feature_test_macros(7) */
#include <sched.h>
#include "assertions.h"
#include "common/oai_version.h"

#include "PHY/types.h"

#include "PHY/defs_eNB.h"
#include "common/ran_context.h"
#include "common/config/config_userapi.h"
#include "common/utils/load_module_shlib.h"
#include "radio/ETHERNET/if_defs.h"

#include <openair1/PHY/phy_extern_ue.h>

#include "PHY/phy_vars.h"

#include "LAYER2/MAC/mac.h"
#include "LAYER2/MAC/mac_proto.h"
#include "RRC/LTE/rrc_vars.h"
#include "PHY_INTERFACE/phy_interface_vars.h"
#include "PHY/TOOLS/phy_scope_interface.h"
#include "nfapi/oai_integration/vendor_ext.h"
#ifdef SMBV
#include "PHY/TOOLS/smbv.h"
unsigned short config_frames[4] = {2,9,11,13};
#endif
#include "common/utils/LOG/log.h"
#include "UTIL/OTG/otg_tx.h"
#include "UTIL/OTG/otg_externs.h"
#include "SIMULATION/TOOLS/sim.h"
#include "common/utils/LOG/vcd_signal_dumper.h"
#include "UTIL/OPT/opt.h"
#include "enb_config.h"


#include "create_tasks.h"

#include "pdcp.h"

#include "PHY/INIT/phy_init.h"

#include "system.h"

#include "lte-softmodem.h"
#include "NB_IoT_interface.h"

#if USING_GPROF
#  include "sys/gmon.h"
#endif

pthread_cond_t nfapi_sync_cond;
pthread_mutex_t nfapi_sync_mutex;
int nfapi_sync_var=-1; //!< protected by mutex \ref nfapi_sync_mutex


pthread_cond_t sync_cond;
pthread_mutex_t sync_mutex;
int sync_var=-1; //!< protected by mutex \ref sync_mutex.
int config_sync_var=-1;

uint16_t runtime_phy_rx[29][6]; // SISO [MCS 0-28][RBs 0-5 : 6, 15, 25, 50, 75, 100]
uint16_t runtime_phy_tx[29][6]; // SISO [MCS 0-28][RBs 0-5 : 6, 15, 25, 50, 75, 100]


int oai_exit = 0;
int NB_UE_INST = 0;

uint64_t                 downlink_frequency[MAX_NUM_CCs][4];
int64_t                  uplink_frequency_offset[MAX_NUM_CCs][4];

int UE_scan = 1;
int UE_scan_carrier = 0;
runmode_t mode = normal_txrx;

FILE *input_fd=NULL;

#if MAX_NUM_CCs == 1
double tx_gain[MAX_NUM_CCs][4] = {{20,0,0,0}};
double rx_gain[MAX_NUM_CCs][4] = {{110,0,0,0}};
#else
double tx_gain[MAX_NUM_CCs][4] = {{20,0,0,0},{20,0,0,0}};
double rx_gain[MAX_NUM_CCs][4] = {{110,0,0,0},{20,0,0,0}};
#endif

double rx_gain_off = 0.0;

double sample_rate=30.72e6;
double bw = 10.0e6;

uint8_t dci_Format = 0;

uint8_t nb_antenna_tx = 1;
uint8_t nb_antenna_rx = 1;

char ref[128] = "internal";
char channels[128] = "0";

int rx_input_level_dBm;
int otg_enabled;

RU_t **RCconfig_RU(int nb_RU,int nb_L1_inst,PHY_VARS_eNB ***eNB,uint64_t *ru_mask,pthread_mutex_t *ru_mutex,pthread_cond_t *ru_cond);

RU_t **RCconfig_RU(int nb_RU,int nb_L1_inst,PHY_VARS_eNB ***eNB,uint64_t *ru_mask,pthread_mutex_t *ru_mutex,pthread_cond_t *ru_cond);

int transmission_mode=1;
int numerology = 0;

THREAD_STRUCT thread_struct;
/* struct for ethernet specific parameters given in eNB conf file */
eth_params_t *eth_params;

double cpuf;


/* hardcoded into gtp_itf.cpp */
bool sdap_data_req(protocol_ctxt_t *ctxt_p,
                   const ue_id_t ue_id,
                   const srb_flag_t srb_flag,
                   const mui_t mui,
                   const confirm_t confirm,
                   const sdu_size_t sdu_buffer_size,
                   unsigned char *const sdu_buffer,
                   const pdcp_transmission_mode_t pt_mode,
                   const uint32_t *sourceL2Id,
                   const uint32_t *destinationL2Id,
                   const uint8_t qfi,
                   const bool rqi,
                   const int pdusession_id)
{
  abort();
}

/* hack: gtp_itf.cpp requires this empty function to be defined here */
bool nr_pdcp_data_req_drb(protocol_ctxt_t *ctxt_pP,
                          const srb_flag_t srb_flagP,
                          const rb_id_t rb_id,
                          const mui_t muiP,
                          const confirm_t confirmP,
                          const sdu_size_t sdu_buffer_size,
                          unsigned char *const sdu_buffer,
                          const pdcp_transmission_mode_t mode,
                          const uint32_t *const sourceL2Id,
                          const uint32_t *const destinationL2Id)
{
  abort();
}

/* hack: nfapi code is common for 4G/5G, so some function calls are hardcoded.
 * Provide body for 5G function not used in 4G code */
void handle_nr_srs_measurements(const module_id_t module_id,
                                const frame_t frame,
                                const sub_frame_t slot,
                                nfapi_nr_srs_indication_pdu_t *srs_ind)
{
  return;
}

/* hack: nfapi code is common for 4G/5G, so some function calls are hardcoded.
 * Provide body for 5G function not used in 4G code */
void handle_nr_srs_toa_vendor_ext_measurements(const module_id_t module_id,
                                               const frame_t frame,
                                               const slot_t slot,
                                               const uint8_t num_ta,
                                               const int16_t *ta_offset_nsec,
                                               const rnti_t rnti)
{
  return;
}

/* forward declarations */
void set_default_frame_parms(LTE_DL_FRAME_PARMS *frame_parms[MAX_NUM_CCs]);

/* TODO these declarations are to be removed */
void nr_slot_select() {};

/*------------------------------------------------------------------------*/

unsigned int build_rflocal(int txi, int txq, int rxi, int rxq) {
  return (txi + (txq<<6) + (rxi<<12) + (rxq<<18));
}
unsigned int build_rfdc(int dcoff_i_rxfe, int dcoff_q_rxfe) {
  return (dcoff_i_rxfe + (dcoff_q_rxfe<<8));
}

void exit_function(const char *file, const char *function, const int line, const char *s, const int assert)
{
  int ru_id;

  if (s != NULL) {
    printf("%s:%d %s() Exiting OAI softmodem: %s\n",file,line, function, s);
  }
  close_log_mem();
  oai_exit = 1;

  if (RC.ru == NULL)
    exit(-1); // likely init not completed, prevent crash or hang, exit now...

  for (ru_id=0; ru_id<RC.nb_RU; ru_id++) {
    if (RC.ru[ru_id] && RC.ru[ru_id]->rfdevice.trx_end_func) {
      RC.ru[ru_id]->rfdevice.trx_end_func(&RC.ru[ru_id]->rfdevice);
      RC.ru[ru_id]->rfdevice.trx_end_func = NULL;
    }

    if (RC.ru[ru_id] && RC.ru[ru_id]->ifdevice.trx_end_func) {
      RC.ru[ru_id]->ifdevice.trx_end_func(&RC.ru[ru_id]->ifdevice);
      RC.ru[ru_id]->ifdevice.trx_end_func = NULL;
    }
  }

  if (assert) {
    abort();
  } else {
    sleep(1); // allow lte-softmodem threads to exit first
    exit(EXIT_SUCCESS);
  }
}

static void get_options(configmodule_interface_t *cfg)
{
  CONFIG_SETRTFLAG(CONFIG_NOEXITONHELP);
  IS_SOFTMODEM_ENB = true;
  get_common_options(cfg);
  CONFIG_CLEARRTFLAG(CONFIG_NOEXITONHELP);

  if ( !(CONFIG_ISFLAGSET(CONFIG_ABORT)) ) {
    memset((void *)&RC,0,sizeof(RC));
    /* Read RC configuration file */
    RCConfig();
    NB_eNB_INST = RC.nb_inst;
    printf("Configuration: nb_rrc_inst %d, nb_L1_inst %d, nb_ru %d\n",NB_eNB_INST,RC.nb_L1_inst,RC.nb_RU);

    if (!IS_SOFTMODEM_NONBIOT) {
      load_NB_IoT();
      printf("               nb_nbiot_rrc_inst %d, nb_nbiot_L1_inst %d, nb_nbiot_macrlc_inst %d\n",
             RC.nb_nb_iot_rrc_inst, RC.nb_nb_iot_L1_inst, RC.nb_nb_iot_macrlc_inst);
    } else {
      printf("All Nb-IoT instances disabled\n");
      RC.nb_nb_iot_rrc_inst=RC.nb_nb_iot_L1_inst=RC.nb_nb_iot_macrlc_inst=0;
    }
  }
}

void set_default_frame_parms(LTE_DL_FRAME_PARMS *frame_parms[MAX_NUM_CCs]) {
  int CC_id;

  for (CC_id=0; CC_id<MAX_NUM_CCs; CC_id++) {
    frame_parms[CC_id] = (LTE_DL_FRAME_PARMS *) malloc(sizeof(LTE_DL_FRAME_PARMS));
    /* Set some default values that may be overwritten while reading options */
    frame_parms[CC_id]->frame_type          = FDD;
    frame_parms[CC_id]->tdd_config          = 3;
    frame_parms[CC_id]->tdd_config_S        = 0;
    frame_parms[CC_id]->N_RB_DL             = 100;
    frame_parms[CC_id]->N_RB_UL             = 100;
    frame_parms[CC_id]->Ncp                 = NORMAL;
    frame_parms[CC_id]->Ncp_UL              = NORMAL;
    frame_parms[CC_id]->Nid_cell            = 0;
    frame_parms[CC_id]->num_MBSFN_config    = 0;
    frame_parms[CC_id]->nb_antenna_ports_eNB  = 1;
    frame_parms[CC_id]->nb_antennas_tx      = 1;
    frame_parms[CC_id]->nb_antennas_rx      = 1;
    frame_parms[CC_id]->nushift             = 0;
    frame_parms[CC_id]->phich_config_common.phich_resource = oneSixth;
    frame_parms[CC_id]->phich_config_common.phich_duration = normal;
    // UL RS Config
    frame_parms[CC_id]->pusch_config_common.ul_ReferenceSignalsPUSCH.cyclicShift = 0;//n_DMRS1 set to 0
    frame_parms[CC_id]->pusch_config_common.ul_ReferenceSignalsPUSCH.groupHoppingEnabled = 0;
    frame_parms[CC_id]->pusch_config_common.ul_ReferenceSignalsPUSCH.sequenceHoppingEnabled = 0;
    frame_parms[CC_id]->pusch_config_common.ul_ReferenceSignalsPUSCH.groupAssignmentPUSCH = 0;
    frame_parms[CC_id]->prach_config_common.rootSequenceIndex=22;
    frame_parms[CC_id]->prach_config_common.prach_ConfigInfo.zeroCorrelationZoneConfig=1;
    frame_parms[CC_id]->prach_config_common.prach_ConfigInfo.prach_ConfigIndex=0;
    frame_parms[CC_id]->prach_config_common.prach_ConfigInfo.highSpeedFlag=0;
    frame_parms[CC_id]->prach_config_common.prach_ConfigInfo.prach_FreqOffset=0;
    //    downlink_frequency[CC_id][0] = 2680000000; // Use float to avoid issue with frequency over 2^31.
    //    downlink_frequency[CC_id][1] = downlink_frequency[CC_id][0];
    //    downlink_frequency[CC_id][2] = downlink_frequency[CC_id][0];
    //    downlink_frequency[CC_id][3] = downlink_frequency[CC_id][0];
    //printf("Downlink for CC_id %d frequency set to %u\n", CC_id, downlink_frequency[CC_id][0]);
    frame_parms[CC_id]->dl_CarrierFreq=downlink_frequency[CC_id][0];
  }
}

void wait_RUs(void) {
  /* do not modify the following LOG_UI message, which is used by CI */
  LOG_UI(ENB_APP,"Waiting for RUs to be configured ... RC.ru_mask:%02lx\n", RC.ru_mask);
  // wait for all RUs to be configured over fronthaul
  pthread_mutex_lock(&RC.ru_mutex);

  while (RC.ru_mask>0) {
    pthread_cond_wait(&RC.ru_cond,&RC.ru_mutex);
    printf("RC.ru_mask:%02lx\n", RC.ru_mask);
  }

  pthread_mutex_unlock(&RC.ru_mutex);
}

void wait_eNBs(void) {
  int i,j;
  int waiting=1;

  while (waiting==1) {
    printf("Waiting for eNB L1 instances to all get configured ... sleeping 50ms (nb_L1_inst %d)\n",RC.nb_L1_inst);
    usleep(50*1000);
    waiting=0;

    for (i=0; i<RC.nb_L1_inst; i++) {
      printf("RC.nb_L1_CC[%d]:%d\n", i, RC.nb_L1_CC[i]);

      for (j=0; j<RC.nb_L1_CC[i]; j++) {
        if (RC.eNB[i][j]->configured==0) {
          waiting=1;
          break;
        }
      }
    }
  }

  printf("eNB L1 are configured\n");
}


/*
 * helper function to terminate a certain ITTI task
 */
void terminate_task(module_id_t mod_id, task_id_t from, task_id_t to) {
  LOG_I(ENB_APP, "sending TERMINATE_MESSAGE from task %s (%d) to task %s (%d)\n",
        itti_get_task_name(from), from, itti_get_task_name(to), to);
  MessageDef *msg;
  msg = itti_alloc_new_message (from, 0, TERMINATE_MESSAGE);
  itti_send_msg_to_task (to, ENB_MODULE_ID_TO_INSTANCE(mod_id), msg);
}

extern void  free_transport(PHY_VARS_eNB *);
extern void  phy_free_RU(RU_t *);

static void init_pdcp(void)
{
  pdcp_layer_init();
  uint32_t pdcp_initmask = (IS_SOFTMODEM_NOS1) ? 0 : LINK_ENB_PDCP_TO_GTPV1U_BIT;

  if (IS_SOFTMODEM_NOS1)
    pdcp_initmask = pdcp_initmask | ENB_NAS_USE_TUN_BIT;

  pdcp_initmask = pdcp_initmask | ENB_NAS_USE_TUN_W_MBMS_BIT;

  pdcp_module_init(pdcp_initmask, 0);
}

static  void wait_nfapi_init(char *thread_name) {
  printf( "waiting for NFAPI PNF connection and population of global structure (%s)\n",thread_name);
  pthread_mutex_lock( &nfapi_sync_mutex );

  while (nfapi_sync_var<0)
    pthread_cond_wait( &nfapi_sync_cond, &nfapi_sync_mutex );

  pthread_mutex_unlock(&nfapi_sync_mutex);
  printf( "NFAPI: got sync (%s)\n", thread_name);
}
configmodule_interface_t *uniqCfg = NULL;
int main ( int argc, char **argv )
{
  int CC_id = 0;
  int ru_id;

  start_background_system();

  if ((uniqCfg = load_configmodule(argc, argv, 0)) == NULL) {
    exit_fun("[SOFTMODEM] Error, configuration module init failed\n");
  }

  mode = normal_txrx;
  logInit();
  lock_memory_to_ram();
  printf("Reading in command-line options\n");
  get_options(uniqCfg);

  if (CONFIG_ISFLAGSET(CONFIG_ABORT)) {
    fprintf(stderr,"Getting configuration failed\n");
    exit(-1);
  }

#if T_TRACER
  T_Config_Init();
#endif
  set_taus_seed (0);
  printf("configuring for RAU/RRU\n");

  cpuf=get_cpu_freq_GHz();
  printf("ITTI init, useMME: %i\n", !IS_SOFTMODEM_NOS1);
  itti_init(TASK_MAX, tasks_info);

  init_opt();
  // to make a graceful exit when ctrl-c is pressed
  set_softmodem_sighandler();
  // strdup to put the sring in the core file for post mortem identification
  LOG_I(HW, "Version: %s\n", strdup(OAI_PACKAGE_VERSION));

  /* Read configuration */
  if (RC.nb_inst > 0) {
    read_config_and_init();
  } else {
    printf("RC.nb_inst = 0, Initializing L1\n");
    RCconfig_L1();
  }

  if (RC.nb_inst > 0) {
    /* initializes PDCP and sets correct RLC Request/PDCP Indication callbacks */
   init_pdcp();
    
    if (create_tasks(1) < 0) {
      printf("cannot create ITTI tasks\n");
      exit(-1);
    }

    for (int enb_id = 0; enb_id < RC.nb_inst; enb_id++) {
      MessageDef *msg_p = itti_alloc_new_message (TASK_ENB_APP, 0, RRC_CONFIGURATION_REQ);
      RRC_CONFIGURATION_REQ(msg_p) = RC.rrc[enb_id]->configuration;
      itti_send_msg_to_task (TASK_RRC_ENB, ENB_MODULE_ID_TO_INSTANCE(enb_id), msg_p);
      rrc_enb_process_itti_msg(NULL);
    }
  }

  if (RC.nb_inst > 0) {
    protocol_ctxt_t ctxt;
    ctxt.module_id = 0 ;
    ctxt.instance = 0;
    ctxt.rntiMaybeUEid = 0;
    ctxt.enb_flag = 1;
    ctxt.frame = 0;
    ctxt.subframe = 0;
    pdcp_run(&ctxt);
  }

  // init UE_PF_PO and mutex lock
  pthread_mutex_init(&ue_pf_po_mutex, NULL);
  memset (&UE_PF_PO[0][0], 0, sizeof(UE_PF_PO_t)*MAX_MOBILES_PER_ENB*MAX_NUM_CCs);
  pthread_cond_init(&sync_cond,NULL);
  pthread_mutex_init(&sync_mutex, NULL);

  rt_sleep_ns(10*100000000ULL);

  if (NFAPI_MODE!=NFAPI_MONOLITHIC) {
    LOG_I(ENB_APP,"NFAPI*** - mutex and cond created - will block shortly for completion of PNF connection\n");
    pthread_cond_init(&sync_cond,NULL);
    pthread_mutex_init(&sync_mutex, NULL);
  }

  if (NFAPI_MODE==NFAPI_MODE_VNF) {// VNF
#if defined(PRE_SCD_THREAD)
    init_ru_vnf();  // ru pointer is necessary for pre_scd.
#endif
    wait_nfapi_init("main?");
  }

  LOG_I(ENB_APP,"START MAIN THREADS\n");
  // start the main threads
  number_of_cards = 1;
  printf("RC.nb_L1_inst:%d\n", RC.nb_L1_inst);

  if (RC.nb_L1_inst > 0) {
    printf("Initializing eNB threads\n");
    init_eNB();
  }
  for (int x=0; x < RC.nb_L1_inst; x++)
    for (int CC_id=0; CC_id<RC.nb_L1_CC[x]; CC_id++) {
      L1_rxtx_proc_t *L1proc= &RC.eNB[x][CC_id]->proc.L1_proc;
      L1_rxtx_proc_t *L1proctx= &RC.eNB[x][CC_id]->proc.L1_proc_tx;
      L1proc->threadPool = (tpool_t *)malloc(sizeof(tpool_t));
      if ( strlen(get_softmodem_params()->threadPoolConfig) > 0 )
       initTpool(get_softmodem_params()->threadPoolConfig, L1proc->threadPool, true);
      else
        initTpool("n", L1proc->threadPool, true);
      L1proctx->threadPool = L1proc->threadPool;
  }

  printf("wait_eNBs()\n");
  wait_eNBs();
  printf("About to Init RU threads RC.nb_RU:%d\n", RC.nb_RU);
  
  // RU thread and some L1 procedure aren't necessary in VNF or L2 FAPI simulator.
  // but RU thread deals with pre_scd and this is necessary in VNF and simulator.
  // some initialization is necessary and init_ru_vnf do this.
  if (RC.nb_RU > 0 && NFAPI_MODE != NFAPI_MODE_VNF) {
    RC.ru = RCconfig_RU(RC.nb_RU, RC.nb_L1_inst, RC.eNB, &RC.ru_mask, &RC.ru_mutex, &RC.ru_cond);
    LOG_I(PHY,
          "number of L1 instances %d, number of RU %d, number of CPU cores %d: Initializing RU threads\n",
          RC.nb_L1_inst, RC.nb_RU, get_nprocs());
    init_RU(RC.ru,RC.nb_RU,RC.eNB,RC.nb_L1_inst,RC.nb_L1_CC,get_softmodem_params()->rf_config_file,get_softmodem_params()->send_dmrs_sync);
    
    for (ru_id=0; ru_id<RC.nb_RU; ru_id++) {
      RC.ru[ru_id]->rf_map.card=0;
      RC.ru[ru_id]->rf_map.chain=CC_id+(get_softmodem_params()->chain_offset);
    }

    config_sync_var=0;

    if (NFAPI_MODE==NFAPI_MODE_PNF) { // PNF
      wait_nfapi_init("main?");
    }

    printf("wait RUs\n");
    // end of CI modifications
    fflush(stdout);
    fflush(stderr);
    // wait_RUs() is wrong and over complex!
    wait_RUs();
    LOG_I(ENB_APP,"RC.nb_RU:%d\n", RC.nb_RU);
    // once all RUs are ready intiailize the rest of the eNBs ((dependence on final RU parameters after configuration)
    printf("ALL RUs ready - init eNBs\n");
    
    if (NFAPI_MODE!=NFAPI_MODE_PNF && NFAPI_MODE!=NFAPI_MODE_VNF) {
      LOG_I(ENB_APP,"Not NFAPI mode - call init_eNB_afterRU()\n");
      init_eNB_afterRU();
    } else {
      LOG_I(ENB_APP,"NFAPI mode - DO NOT call init_eNB_afterRU()\n");
    }

    LOG_UI(ENB_APP,"ALL RUs ready - ALL eNBs ready\n");
    // connect the TX/RX buffers
    sleep(1); /* wait for thread activation */
    LOG_I(ENB_APP,"Sending sync to all threads\n");
    pthread_mutex_lock(&sync_mutex);
    sync_var=0;
    pthread_cond_broadcast(&sync_cond);
    pthread_mutex_unlock(&sync_mutex);
  }

  create_tasks_mbms(1);
  sleep(1);
  config_check_unknown_cmdlineopt(uniqCfg, CONFIG_CHECKALLSECTIONS);

  // wait for end of program
  LOG_UI(ENB_APP,"TYPE <CTRL-C> TO TERMINATE\n");
  // CI -- Flushing the std outputs for the previous marker to show on the eNB / DU / CU log file
  fflush(stdout);
  fflush(stderr);
  // end of CI modifications
  //getchar();
  if(IS_SOFTMODEM_DOSCOPE)
     load_softscope("enb",NULL);
  itti_wait_tasks_end(NULL);

#if USING_GPROF
  // Save the gprof data now (rather than via atexit) in case we crash while shutting down
  fprintf(stderr, "Recording gprof data...\n");
  _mcleanup();
  fprintf(stderr, "Recording gprof data...done\n");
#endif // USING_GPROF

  oai_exit=1;
  LOG_I(ENB_APP,"oai_exit=%d\n",oai_exit);
  // stop threads

  #if 0 //Disable clean up because this tends to crash (and unnecessary)
  if (RC.nb_inst == 0) {
    if(IS_SOFTMODEM_DOSCOPE)
      end_forms();

    LOG_I(ENB_APP,"stopping MODEM threads\n");
    stop_eNB(NB_eNB_INST);
    stop_RU(RC.nb_RU);

    /* release memory used by the RU/eNB threads (incomplete), after all
     * threads have been stopped (they partially use the same memory) */
    for (int inst = 0; inst < NB_eNB_INST; inst++) {
      for (int cc_id = 0; cc_id < RC.nb_CC[inst]; cc_id++) {
	free_transport(RC.eNB[inst][cc_id]);
        phy_free_lte_eNB(RC.eNB[inst][cc_id]);
      }
    }

    for (int inst = 0; inst < RC.nb_RU; inst++) {
      phy_free_RU(RC.ru[inst]);
    }

    free_lte_top();
    end_configmodule();
    pthread_cond_destroy(&sync_cond);
    pthread_mutex_destroy(&sync_mutex);
    pthread_cond_destroy(&nfapi_sync_cond);
    pthread_mutex_destroy(&nfapi_sync_mutex);
    pthread_mutex_destroy(&ue_pf_po_mutex);

    for(ru_id=0; ru_id<RC.nb_RU; ru_id++) {
      if (RC.ru[ru_id]->rfdevice.trx_end_func) {
        RC.ru[ru_id]->rfdevice.trx_end_func(&RC.ru[ru_id]->rfdevice);
        RC.ru[ru_id]->rfdevice.trx_end_func = NULL;
      }

      if (RC.ru[ru_id]->ifdevice.trx_end_func) {
        RC.ru[ru_id]->ifdevice.trx_end_func(&RC.ru[ru_id]->ifdevice);
        RC.ru[ru_id]->ifdevice.trx_end_func = NULL;
      }
    }
  }
  #endif

  pdcp_module_cleanup();
  terminate_opt();
  logClean();
  printf("Bye.\n");
  return 0;
}